Hem taşınabilir, hemde profesyonel tüm bunlar sadece JBL EON 210P ses sisteminde bir arada profesyonellerin tercihi JBL'nin bu yeni ürünü eğitim kurumları içinde çok kullanışlı her tarafa taşıabilip aynı zamanda kolay montajı ile JBL kalitesini yaşayın. Teknik ayrıntılar yazımzın devamındadır.
System Power Rating | : | 300 Watts (2 X 150 Stereo) |
Maximum SPL Output | : | 124 dB peak system output (pink noise) |
Net Weight of System | : | 33 lbs. (19 lbs. for unit with powered mixer, 14 lbs. for unit with storage pod) |
System Type | : | Powered mixer with 2 two-way bass-reflex enclosures |
Frequency Range (-10 dB) | : | 60 Hz - 20 kHz |
Frequency Response (±3 dB) | : | 75 Hz - 19 kHz |
AC input | : | 120 - 240 V 50/60 Hz, voltage selector switch sets operational range |
Amplifier Design | : | Crown® Class D |
Output Connector | : | 2 X 1/4” TS (unbalanced) amplifier outputs |
Input Connectors | : | 8 inputs (4 Mono Mic/Line, 2 X Stereo) |
Channels | : | 1-4 are XLR / 1/4” jack combo connectors, XLR is a mic level input, 1/4” is a line level input. 5-6, one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo). 7-8 is a 3.5 mm stereo jack |
Input Impedance | : | Ch 1-4 Combo: XLR 3 K Ohms Balanced Ch 1-4 Combo: TRS 20 K Ohms Balanced Ch 5-6: TRS 25 K Ohms Balanced Ch 5-6: RCA 12 K Ohms Unbalanced Ch 7-8: 3.5 mm 30 K Ohms Unbalanced |
Phantom Power | : | 30 V |
Output Connectors | : | Monitor outputs: one pair of 1/4” balanced TRS jacks (stereo), and a pair of RCA jacks (stereo) Headphone output: one 3.5 mm stereo jack |
Signal Indicators Main Output LED Ladder | : | Limit: Red LED indicates limiter active condition Signal: Green LED indicates signal present |
Signal Indicators: Ch 1-4 | : | Peak LED: Green = signal present, Red = input overload |
EQ | : | Individual channel Bass and Treble controls, center detent, +/-6 dB cut and boost |
System Limiter | : | On Board DSP Limiting and Tuning |
LF Driver | : | 1 x JBL 328 H 250 mm (10 in) woofer |
HF Driver | : | 1 x JBL 2414H-1 37.5 mm (1.5” ) annular polymer diaphragm, neodymium compression driver |
Coverage Pattern | : | 100º x 60º nominal |
Crossover Frequency | : | 2 kHz |
Crossover Type | : | Passive network, 2nd order filters (-12 dB per octave) for high pass and low pass filters |
Enclosure | : | Polypropylene |
Suspension/ Mounting | : | 36 mm pole socket with stabilizing screw |
Handles | : | One on top |
Grille | : | Powder coated perforated steel |
Shipping Package (HxWxD) | : | 21.5” x 26” x 13.75” (546 mm x 660 mm x 349 mm) |
0 yorum:
Yorum Gönder